There is usually bolt or pin you remove from the clutch cable on the pedal that allow you to replace the cable. Crawl under the driver side dash with a light and you should see the cable coming in from the firewall attached to the clutch pedal. You'll need to remove the pin attached to the clutch pedal and removed the cable from the engine side. Next, you'll need to remove the clutch cable from the fork and install the new cable. After that you'll need to adjust the new cable once installed. Just don't over tighten this cable because it will cause the clutch to wear out too soon or burn up. Make sure there is free pedal.
SPONSORED LINKS
Monday, June 9th, 2014 AT 10:29 AM
