SPONSORED LINKS

Will run on hwy fine

Tiny
SB
  • MEMBER
  • 1988 FORD F-150
  • 87,500 MILES
1988 f150 with 4.9 battery went out had it replaced & know in the mornings it will idle & then die. Know it will idle for a few second & die all them time. Have replace idle air valve & cleaned the t.B. Changed the tp sensor & map sensor & temp sensor
SPONSORED LINKS
Tuesday, January 10th, 2012 AT 1:52 PM

3 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Its probably going thru an idle relearning process-due to battery being dead-try cleaning out the IACV and see what happens to include the MAF sensor
Was this
answer
helpful?
Yes
No
Tuesday, January 10th, 2012 AT 2:54 PM
Tiny
SB
  • MEMBER
  • 3 POSTS
BATTERY HAS BEEN ON FOR 2-3 WKS & HAVE CLEANED T.B. & CHANGED
IDLE AIR & STILL SAME TRYED MAF & TP SENSOR & TEMP SENSOR & CONTROL MODULE STILL SAME
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, January 10th, 2012 AT 5:42 PM
Tiny
SB
  • MEMBER
  • 3 POSTS
Found loose battery cable tighten it & retry in morning to see
what happens on cold start
Was this
answer
helpful?
Yes
No
Tuesday, January 10th, 2012 AT 9:34 PM

Please login or register to post a reply.

Related Idle Air Control Replace/Remove Content

Idle Air Control Motor Replacement
GUIDE
Idle Air Control Motor Replacement
The idle air control motor or idle speed control motor is designed to adjust the air flow into the intake manifold at engine idle. Engine idle speed is monitored by the PCM...
VIEW MORE

Sponsored links