REMOVE OR DISCONNECT
Battery ground cable.
Drain cooling system.
Heater inlet and outlet hoses from heater core.
Right lower sound absorber panel.
ECM attaching screw and move aside.
Right lower I.P. Trim panel.
Lower right I.P. Carrier-to-cowl screw.
Four (4) heater case cover screws. Upper left screw may be reached with a long socket extension through the l.P. Openings exposed by removal of the lower right I.P. Trim panel. Carefully lift the lower right comer of the I.P. To align socket extension.
Heater case cover.
Core support plate and baffle screws.
Heater core, support plate and baffle from case.
INSTALL OR CONNECT
Heater core, support plate and baffle to case.
Core support plate and baffle screws.
Heater case cover.
Four (4) heater case cover screws.
Lower right I.P. Carrier-to-cowl screw.
Right lower I.P. Trim panel.
ECM.
Right lower sound absorber panel.
Heater inlet and outlet hoses to heater core.
Refill cooling system and check for leaks.
Battery ground cable.
Images (Click to make bigger)
SPONSORED LINKS
Saturday, December 11th, 2010 AT 7:30 AM