SPONSORED LINKS

Acura Legend 1988 CV joints

Tiny
POPDOG
  • MEMBER
  • 1988 ACURA LEGEND
  • 6 CYL
  • FWD
  • 255,000 MILES
Can I get specifics for 1988 acura legend cv joint and complete axel replacement. Do I need to remove the disc brakes first and what else I did this on another car a long time ago.
is there a ball joint to remove etc.
Popdog
Jerry
SPONSORED LINKS
Wednesday, August 3rd, 2011 AT 4:32 AM

2 Replies

Tiny
MHPAUTOS
  • MECHANIC
  • 31,937 POSTS
Undo the axle nut, jack up and place body on stands, remove wheel and undo tie rod, undo both lower strut bolts and then you should be able to swing stub to one side and in doing so slid shaft out, you may have to give it a tap with a soft hammer to get it moving, place container under trans and with a suitable lever pop out inner end, then lift shaft clear.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, August 3rd, 2011 AT 11:07 AM
Tiny
POPDOG
  • MEMBER
  • 2 POSTS
Thank you
helpful videos on you tube also
Was this
answer
helpful?
Yes
No
Thursday, August 4th, 2011 AT 4:13 AM

Please login or register to post a reply.

Related CV Axle Replace/Remove Content

CV Axle Replacement
GUIDE
CV Axle Replacement
All front wheel drive and independent rear suspension cars utilize a CV axle to deliver power from the engine to the wheels. These CV axles have a six balls inside a CV...

Sponsored links