1987 Suzuki Mehran Dragging clutch

Tiny
ARSHAD SADAL
  • MEMBER
  • 1987 SUZUKI MEHRAN
  • 0.8L
  • 3 CYL
  • FWD
  • MANUAL
  • 550,000 MILES
I just rebuild engine of my car and replaced the flywheel, pressure place, clutch plate, thrust bearing, clutch cable, and also check all that was possible related to clutch system. I adjusted the cable to extreme low and high as well. The issue is my car keeps on moving in first and second gear even if the clutch is fully depressed. This mostly happens when I am in traffic jam and need to move car in first or second gear. When this happens it becomes very difficult to change gear from first to second.
Wednesday, December 3rd, 2014 AT 3:09 AM

1 Reply

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
We don't have an y info on that model in U.S. The pic I'm sending is out of a samurai. Check to see if shaft has any wear in bushings etc. Or teeth the push in throw-out bearing. Or where the cable hooks up as it may be worn there and not fully engaging the clutch
Was this
answer
helpful?
Yes
No
Wednesday, December 3rd, 2014 AT 8:38 AM

Please login or register to post a reply.

Sponsored links