SPONSORED LINKS

1962 Ford Ranchero clutch

Tiny
BOBBY A MITCHELL
  • MEMBER
  • 1962 FORD RANCHERO
  • 48,000 MILES
I replaced the clutch rod return spring, and now the clutch will not disengage. I can move the clutch fork by habd under the car and all the linkage is still good. The clutch fork appears to go all the way back as it should to engage clutch, and the pedal is on the floor, but car is still in gear
SPONSORED LINKS
Sunday, November 3rd, 2013 AT 1:52 PM

2 Replies

Tiny
CJ MEDEVAC
  • MECHANIC
  • 11,005 POSTS
SEE ANY GREASE (90 WEIGHT) SLUNG AROUND?

IF THE FRONT TRANNY SEAL IS LEAKING, THAT'LL MAKE THE DISK ADHERE TO THE FLYWHEEL

THE MEDIC
Was this
answer
helpful?
Yes
No
Sunday, November 3rd, 2013 AT 7:03 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Sounds like abad clutch to me yo may have pushed the release bearing through the pressure plate.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, November 4th, 2013 AT 6:47 AM

Please login or register to post a reply.

Related Transmission Clutch Disengage Content

Sponsored links