SPONSORED LINKS

2002 Dodge Intrepid vehicle cranks but wont start

Tiny
FLORESRU2
  • MEMBER
  • 2002 DODGE INTREPID
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 89,000 MILES
Cart cranks but it will not start replaced cam sensor, crank sensor, cold temperature sensor. Checked code and got a Po340 no cam signal at P CM. Vehicle has no spark checked fuses and switches all are ok. What is wrong
Thursday, September 4th, 2008 AT 6:09 PM

3 Replies

Tiny
2CARPRO JACK
  • MECHANIC
  • 11,533 POSTS
Try the ASD relay (auto shut down) if it isnt working the PCM wont get the proper voltage it needs to work. Other than that, need to test teh continuity of the wires to the PCM and for 5 volt reference at the cam sensor. And ground resistance at the sensor
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, September 5th, 2008 AT 7:50 AM
Tiny
FLORESRU2
  • MEMBER
  • 2 POSTS
The automatic shut down relay has already been replaced
Was this
answer
helpful?
Yes
No
-1
Saturday, September 6th, 2008 AT 9:53 AM
Tiny
2CARPRO JACK
  • MECHANIC
  • 11,533 POSTS
Did you check for the 5 volt reference and good ground with a meter at the connector for the cam sensor? Also continuity of the wire to the PCM from cam sensor?
Was this
answer
helpful?
Yes
No
Sunday, September 7th, 2008 AT 8:37 AM

Please login or register to post a reply.

Related Engine Not Running Content

How to fix an engine that wont start
VIDEO
How to fix an engine that wont start
Instructional repair video
Engine Not Starting
GUIDE
Engine Not Starting
Over the past 20 years at 2CarPros we have identified the top problems that are easily fixed. This guide can save you a trip to the repair garage or calling a tow truck and...
VIEW MORE

Sponsored links