CHEVROLET INSTRUMENT CLUSTER LIGHT

No Turn Signals, No Running Lights. Brake Lights Work When I Step On The Brake Pedal And Headlights Work In Both Low And High Dimmer Switch...

I Know There's Power, But None Of The Gauges Are Reading At All. Seems Like Something Shorted Out And Since That Happened The Dome...

I Just Had My Cluster Upgraded Cause I Had Lights Out. Now Some Of The Lights Are Going Out Again. Can Something Be Causing This To Happen...

I Took Truck To Emissions Which I Failed Unknowing That My Ecm Fuse Was Blown. I Replaced The Fuse And Viola My Warning Lights Started...

Replaced Washer Pump Motor And Now No Lights. Replaced Fuse And Still No Lights.

I Have A 2000 Chevrolet Impala V-6 3800 With 62,500 Miles On It And Any Help Out There On Why My Insrument Lights Go Dim When It Gets Dark....

It's A 2000 Chevy Impala With A 3400 Engine With Approx 81,000 Miles. When Starting The Instrument Panel Lights Up, Then You Hear A Click...

Dear Tech My 2000 Chevy Astro Is Not Having Instrument Illumination Lights. I Check The Bulbs On The Instrument Cluster And They Are Good...

I Have The Truck Listed Above That Cut Out While Driving. At First Thought A Fuse And Checked All Under Dash And They Are All Good. Same...

Of Course The Heater And A/c Do Not Work Now. I Had An Extra Module And Installed It. No Difference. I Checked Every Fuse In The Dash Fuse...